MultiTunnel Contact us

Day to day

Turn networks on and off, read what each one says, change your names, ask for access you need, and leave a network you no longer need.

Turn a network on or off

In the window, use the switch beside the network. Try it here: click the highlighted switch, or use Next.

  1. Turn it off

    Click the switch beside the network you want off, here Harbour Studio.

  2. It's off on this computer

    It says Disconnected on this computer. Off means off on this computer only: you stay a member, and the other network carries on. Click the switch again to turn it back on.

  3. Connecting

    It starts, and looks for the network's other devices. Its small rings show one ring dashed while it connects.

  4. Back on

    It's connected again, usually within a few seconds.

Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

Use the network's short name on this computer, such as harbour.

Windows
& $mt disconnect $st harbour
Linux
sudo multitunnel disconnect /var/lib/multitunnel harbour
Windows
& $mt connect $st harbour
Linux
sudo multitunnel connect /var/lib/multitunnel harbour

Yours on this computer

Your networks are yours on this computer: they connect while you are signed in, and other people who use the computer don't get them. If several people use one computer, each joins from their own account. A computer several people use

Runs for a service
A network an administrator set up for the computer itself, for a server or a kiosk. It stays connected whoever is signed in. Windows asks for permission before you turn it on or off.
For everyone on this computer
Set up by an earlier version for everyone who uses the computer, so Windows asks for permission each time you turn it on or off, and you can't change your details in it. If you are the only one who uses the computer, open the network, open This computer is only used by me, and choose Make it mine…. Windows asks for permission once, then asks you to confirm. From then on it is yours, and others who sign in to the computer no longer get it.
Command line: Make it mine

On Windows, in Terminal (Admin), once you have set $mt and $st. On Linux, in a terminal. Before you start

Signed in as yourself:

Windows
& $mt owner $st northwind me
Linux
sudo multitunnel owner /var/lib/multitunnel northwind me

From the rings by the clock

You can do the same without opening the window. Right-click the rings, point at the network, and choose Connect or Disconnect.

  1. Right-click the rings

    Right-click the rings by the clock. (Pointing at them shows how your networks are, in words.)

  2. Point at the network

    The menu lists each network by name, with how it is. Point at the one you want, here Harbour Studio.

  3. Choose Disconnect

    Choose Disconnect. For a network that's off, choose Connect instead.

  4. Done

    The network is off on this computer. The rings stay in full colour while another network is connected.

The menu also has Open MultiTunnel, which opens the window, and Exit the tray app, which takes the rings away until you next sign in: MultiTunnel itself keeps running.

What each network says

In the window, the words under each network's name say how it is.

Connected, 2 of 3 other devices reachable now
It's working. Devices that are switched off show as not reachable.
Connected (no other devices in the network yet)
It's working; nobody else has joined yet.
Connecting
It's starting, or looking for the other devices.
Connecting: none of the 3 other devices reachable yet
It's on, but can't reach any other device yet. What to do
Connecting: getting the network's details
Your computer has just been approved, and is fetching the network's details. It connects in a moment.
Waiting for the network's administrator to approve this computer
Send your reply code to your administrator, if you haven't. Joining
Disconnected on this computer
You turned it off here. You're still a member.
Can't start on this computer
Something on this computer stops this network starting, and the window says what. Your other networks aren't affected. Show it to whoever looks after this computer: once it's put right, the network starts again by itself.
On, but held: another network here has its addresses
It's switched on, but another network on this computer has the addresses it needs here, so it waits. It shows as on, but held, like connecting, never as off. It connects by itself once the other network leaves this computer, and the network's page says why. Meanwhile its names get no answer here: they never go anywhere else. Your other networks aren't affected.
On, but held: waiting for its addresses
As above, but the addresses are on their way to being free: it connects by itself once they are. Nothing to do.
No longer a member
Your computer was removed, or its time ran out. You need a new invite to come back.
Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

See a network's devices and how this computer reaches each one.

Windows
& $mt devices $st northwind
Linux
sudo multitunnel devices /var/lib/multitunnel northwind
Windows
& $mt peers $st northwind
Linux
sudo multitunnel peers /var/lib/multitunnel northwind

Change your details

You can change your display name, your username, your email and this computer's name yourself, without your administrator, unless your network's administrator has turned this off.

  1. Open the network

    In the window, choose Open › beside the network.

  2. Choose to change them

    Choose Change your details.

  3. Change what you need

    Change your Display name, Username or Email, here adding an email, and choose Save.

    Use this computer's name is ticked, so this computer is called by its own name in the network. Untick it to type a name of your own.

  4. Saved

    Everyone in that network sees the change within a minute. Your other networks are left as they were.

Display name
Your name as people see it, such as Dana Shah.
Username
A short name for you, such as dana, for places where a name is typed exactly, such as your administrator's access rules. You can leave it empty.
Email
So people in the network can reach you.
Use this computer's name
Ticked, this computer is called by its own name in the network, in small letters, and follows it if the computer is renamed. Untick it to type a name of your own.
  • A name or username that reads like someone else's in the network is turned down.
  • Each username belongs to one person for good: one you stop using is never given to anyone else, and you can take it back.
  • A computer's name uses lower-case letters, digits and hyphens, such as dana-laptop. If another device in the network has, or had, your computer's name, MultiTunnel adds a number, such as dana-laptop-2.
  • A new computer name is followed once it has lasted a few minutes. If your administrator renames this computer in the network, it stops following the computer's name. A phone follows the name it has in Android's settings in the same way.
  • A username needs every device in the network to have an up-to-date MultiTunnel. If one doesn't, you're told to ask your administrator to update it.
  • Each computer can make up to 6 of these changes a day.
  • If your administrator has turned this off, the network's page says to ask an administrator to change your name.
  • MultiTunnel knows you and your computer by an ID, not by name. Changing a name never changes what you can reach.
Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

Windows
& $mt me $st northwind -display "Dana Shah" -username dana -email dana@northwind.example
Linux
sudo multitunnel me /var/lib/multitunnel northwind -display "Dana Shah" -username dana -email dana@northwind.example

Give only what you're changing. To give this computer a name of your own in the network, or to have it follow the computer's own name again:

Windows
& $mt me $st northwind -device-name dana-work-laptop -follow off
Linux
sudo multitunnel me /var/lib/multitunnel northwind -device-name dana-work-laptop -follow off
Windows
& $mt me $st northwind -follow on
Linux
sudo multitunnel me /var/lib/multitunnel northwind -follow on

The network's short name

Each network has a short name, such as northwind, chosen by its administrator: the end of its devices' full names, as in files.northwind.multitunnel. You only need it if you type names or commands. The window shows networks by their name, and the short name under Details.

  1. In the window, choose Open › beside the network, and open Details.
  2. It says Short name on this computer. To give the network another one here, choose Change, type it, and choose Save. It uses lower-case letters, digits and hyphens.
  3. If this computer uses a different one while the network's own is free here, Details says so: choose Use the network's short name to switch to it.

The network's page stays open while it changes, and says Saved. Its short name on this computer is now and the new one. A short name is for everyone who uses this computer; the network's other devices aren't affected.

Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

Give the network's short name now, then the new one. Run it again with the old one to undo.

Windows
& $mt relabel $st northwind northwind-clinic
Linux
sudo multitunnel relabel /var/lib/multitunnel northwind northwind-clinic

Names from a network

Your administrator can set up names for the network's own services, such as intranet.northwind.example. MultiTunnel answers them for you while the network is on. Every device can also be reached by its own name, and a network's gateway can answer the names of services behind it, such as a cloud database. The network's page lists its names under Names from this network.

When you turn a network off, its names are looked up as usual on this computer, as if MultiTunnel weren't there: a service that also has a public address, such as a website, opens on the internet. The exception is a name another of your networks also gives: it still gets no answer, unless you chose the network that's on to answer it (below). A network that is on but not connected, because it is connecting or held, keeps its names to itself: they get no answer until it connects, and never go anywhere else.

If you'd rather not use a network's names on this computer, open This computer and turn off Use names from that network. Those names are then looked up on the internet as usual.

A name two networks give. If two of your networks both give the same name, such as one for a shared service, neither answers it at first, and on a computer the network's page says so under Names from this network. Choose Use and the network's name, for it, to have that network answer it on this computer. It is for that name alone: both networks keep their other names. Let neither answer it undoes it.

Your own network's names come first: a gateway's name under a domain your own network uses is looked up there as usual, not through the gateway.

Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

Windows
& $mt names $st northwind off
Linux
sudo multitunnel names /var/lib/multitunnel northwind off

Use on to use them again. To have a network answer a name another network gives too, or to undo it:

Windows
& $mt names $st northwind use db.northwind.example
Linux
sudo multitunnel names /var/lib/multitunnel northwind use db.northwind.example
Windows
& $mt names $st northwind use db.northwind.example off
Linux
sudo multitunnel names /var/lib/multitunnel northwind use db.northwind.example off

Ask for access

If you can't reach something you need in a network, such as a shared folder or a remote desktop, you can ask its administrators. Asking for access is part of the Organisation plan: if your network's plan doesn't include it, the window says so.

  1. In the window, choose Open › beside the network.
  2. Under Asking for access, choose Ask for access….
  3. Choose What you need to reach: a device, a service, or an office network.
  4. Choose What for, such as File sharing (shared folders) or Remote desktop. Not sure? Choose what you'd use it for. Something else… lets you type ports, such as tcp/8080, if you've been told them.
  5. Choose For how long, from an hour to 30 days, and say Why, in a few words for the administrators.
  6. Choose Ask.

Your request appears under Asking for access, waiting for an administrator. When one answers, the window says so: approved until a time, or declined. If it's approved, this computer can reach what you asked for until then, and the access ends by itself. Nothing changes until an administrator approves.

  • Approval is for this computer only. On another of your devices, ask from that one.
  • A request nobody answers within a week lapses. You can ask again.
  • Each computer can ask 3 times a day, with up to 3 requests waiting.
  • Your reason is kept in the network's records, which its devices hold. Don't put passwords or private details in it.

For administrators: Requests for access.

Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

Ask to reach a device (or service: and a service's name, or lan: and a gateway's name), on its ports, for a time such as 8h or 3d, and say why:

Windows
& $mt access $st northwind ask files tcp/445 8h "monthly figures"
Linux
sudo multitunnel access /var/lib/multitunnel northwind ask files tcp/445 8h "monthly figures"

See your requests, and their answers:

Windows
& $mt access $st northwind
Linux
sudo multitunnel access /var/lib/multitunnel northwind

On an Android phone

The phone app uses the window's words, with "this phone" for "this computer". Tap a network to open its page.

The switch
Beside each network and on its page: turns the network on or off on this phone. Turn everything off, on the first screen, stops MultiTunnel on the phone; you stay in your networks. Android runs one VPN app at a time, so all your networks share MultiTunnel's.
When another VPN app takes over
Android lets only one VPN app run at a time. When another one starts, MultiTunnel stops at once and says why on its first screen: Another VPN app is on…, or Android stopped MultiTunnel… if it was turned off in Android's settings. The networks you had switched on say Off until you tap Connect. Tap Connect when you want MultiTunnel back: Android turns the other VPN app off, and your networks connect again. You stay in your networks throughout.
Change your details
Opens Your details: Your name, Username, Email, and Use this phone's name, which keeps the phone's name in the network in step with its name in Android's settings. Turn it off to type This phone's name yourself.
Show details
The network's short name on this phone, with Change, and Use the network's short name when it is free here; the network's ID and this phone's address.
Devices
Each of the network's devices, whose it is, and whether it is online now, or when it was last seen.
Asking for access
Your requests and their answers. Ask for access… opens a screen with the same choices as on a computer: what to reach, what for, for how long, and why.
Names from this network
The names the network gives, with a Use names from switch for that network. The first time you connect, the phone asks Reach devices by name? first. Names a network's gateway answers, such as a cloud database's, work on the phone too.
Leave
At the bottom of the network's page, as on a computer.

Administering a network, such as approving devices or answering requests, is done on a computer that holds its admin key.

When your membership is ending

Many networks let a computer stay a member for a set time, often 90 days. Near the end, the window shows when it ends, and the network's rings show an orange dot. Ask your administrator to extend it before then.

If it ends, the network says No longer a member, and you'll need a new invite.

Leave a network

  1. In the window, choose Open › beside the network.
  2. At the bottom of its page, choose Leave Northwind Clinic… (with your network's name).
  3. MultiTunnel asks Leave Northwind Clinic? and says what happens. Choose Yes.

Your computer leaves the network, tells its other devices if it can reach one, and deletes its keys for it. To join again, you'll need a new invite.

If it couldn't tell any of the network's other devices, for example because they were all off, MultiTunnel says so. Ask your administrator to remove your computer too.

Command line

On Windows, in your own Terminal, as yourself (not as administrator), once you have set $mt and $st. On Linux, in a terminal. Before you start

Windows
& $mt leave $st northwind
Linux
sudo multitunnel leave /var/lib/multitunnel northwind

Still stuck?

Ask your network's administrator first: they can see your network and fix most things. For anything they can't, email us. A person will reply.

enquiries@multitunnel.co.uk